Skip to content
TabShedKitsMy desk

Speed Up a Podcast or Slow Down a Song to Learn It: Choosing the Right Speed

Updated 5 min readBy

How to pick a playback speed for listening, transcribing or practising music, and when to keep the pitch or let it change.

Audio Speed ChangerSpeed up or slow down audio
Open Audio Speed Changer
On this page
  1. Speed and pitch are two different things
  2. Choosing a speed by goal
  3. Step by step
  4. What to expect from the sound
  5. Changing the key at the same time
  6. Problems and fixes
  7. When not to use it
  8. Frequently asked questions

People change the speed of audio for three different reasons: to get through a long recording faster, to hear every word of something fast, or to learn a passage on an instrument. Each calls for a different setting. This guide helps you choose a speed in the Audio Speed Changer, and explains the one switch that decides whether the result sounds natural: Keep the pitch.

Speed and pitch are two different things

On an old tape or record, playing faster made everything higher, and the singer turned into a chipmunk. That is speed and pitch tied together. Modern time-stretching separates them: the audio is played faster while the pitch stays where it was. In the tool this is the Keep the pitch switch.

  • Keep the pitch on (the right choice for almost everything): voices sound like the same person talking faster or slower; songs stay in the same key.
  • Keep the pitch off: speed and pitch move together, like a tape. Useful for a deliberate effect, a slowed-down dreamy sound or a sped-up comic voice, or when you want to imitate a tape machine.

Choosing a speed by goal

GoalTryNotes
Finish a lecture or podcast sooner1.25×, 1.5×Add speed in steps; your ear adapts after a few minutes. Dense or accented speech may need less.
Skim a long recording to find something2×Good enough to follow the topic, not to catch details. Mark the time and listen again at normal speed.
Write down what was said (transcribe)0.75×, 0.5×Slow enough to type along. At 0.5× speech starts to sound drawn out, but every syllable is clear.
Learn a fast guitar or piano passage0.75×, then 0.5×, then back upPractise at a speed where you make no mistakes, then raise it one preset at a time.
Hear a difficult sentence in a language you are learning0.75×Natural rhythm is kept at moderate slowdowns; very slow speech distorts it.

The slider runs from 0.25× to 4× in steps of 0.25, and there are presets for 0.25, 0.5, 0.75, 1, 1.25, 1.5, 2 and 4. Extreme settings are meant for finding things or for effects, not for comfortable listening.

Step by step

  1. Open the tool and drop an MP3, WAV, M4A or OGG file, or paste it with Ctrl+V.
  2. Pick a preset or move the Speed slider. The tool does not give you a download until the speed is something other than 1×.
  3. Leave Keep the pitch on unless you want the tape effect.
  4. Use the Original and speed-changed buttons above the waveform to switch between the two versions and compare. The length of the changed version appears on the waveform.
  5. Choose MP3 · 192 kbps or WAV · lossless and download.

What to expect from the sound

Time-stretching works by repeating or dropping tiny slices of the sound and blending them. Small changes, such as 1.25× or 0.75×, are hard to notice. As you go further, artifacts appear: a slight echo or smear on consonants when slowing speech, a metallic or phasing quality on sustained notes, and a "swimming" feel on drums. This is a limit of the method, not a fault in your file. Listen to a long enough stretch in the preview, especially a passage with a clear consonant or a drum hit, before you commit.

If you only want to listen faster for yourself, the speed control in your podcast app or video player does the same job live and does not create a new file. Use the Speed Changer when you need a file: to put on a player that has no speed control, to share a slowed-down practice track, or to keep a sped-up copy for later.

Changing the key at the same time

Slowing a song for practice sometimes makes the pitch awkward for singing, or you may want to practise in a different key. Speed and pitch are separate tools here: set the tempo with this one, then change the key with the Pitch Changer. Do the pitch change on the already slowed file, and export as WAV in the first step so the audio is compressed only once.

Problems and fixes

  • The voice sounds robotic. You are at an extreme setting. Go back toward 1× or accept a smaller change.
  • It sounds like a chipmunk or a monster. Keep the pitch is off. Switch it on.
  • The download is not offered. The speed is still 1×.
  • The file will not load. The browser cannot decode the format. Convert it to MP3 or WAV first; for the audio of a video, use Video to Audio.
  • The slowed track is too quiet or uneven. Level it afterwards with the Volume Booster or Normalize Audio.

When not to use it

Speed changes do not fix poor audio. A mumbled recording stays mumbled at 0.5×. For a recording full of background noise, clean it first with Remove Background Noise, then slow it. And for transcription of an important interview, a dedicated transcription player with loop and footswitch support will save more time than any file conversion.

Frequently asked questions

Does the file length change?

Yes. At 2× a ten-minute file becomes five minutes; at 0.5× it becomes twenty.

Which format should I export?

MP3 at 192 kbps is fine for listening. Choose WAV if you will process the file again.

Is my audio uploaded?

No. The processing runs in your browser.

Can I use a speed between the steps, like 1.1×?

The slider moves in steps of 0.25, so the closest options are 1× and 1.25×.