Skip to content
TabShedKitsMy desk

Clean Up a Noisy Voice Recording: What Noise Removal Can and Cannot Fix

Updated 5 min readBy

Which kinds of noise browser-based noise removal handles well, how to set Strength, Mode and mains hum, and when to re-record instead.

Remove Background NoiseClean hiss, hum and room noise from voice recordings and videos
Open Remove Background Noise
On this page
  1. What kind of noise do you have?
  2. How it works, in plain terms
  3. Step by step
  4. Strength is a matter of taste
  5. What it cannot fix
  6. Where it fits in a workflow
  7. Problems and fixes
  8. Recording tips that make cleanup easier
  9. Frequently asked questions

The recording is good: the words are right, the take is the best one. But there is a fan humming in the background, or a buzz from a power cable, or the hiss of a cheap microphone. This guide explains what Remove Background Noise does well, which settings to try in which order, and which problems no tool will fix.

What kind of noise do you have?

Noise comes in types, and each calls for a different approach. Listen to a quiet part of your file with headphones and decide:

You hearIt is probablySetting to try
A low, constant buzz or toneMains hum from a cable, lamp or power adapterMains hum: Auto, or pick 50 Hz or 60 Hz by region
A steady "shhh"Microphone or preamp hissMode: Strong (steady hiss)
Fan, traffic, air conditioning, room noise under a voiceBroadband background noiseMode: Standard
Another person talking, music with lyrics, a TVSpeech or structured soundNot removable here (see below)
Clicks, bumps, a dog bark, a doorSudden noisesCut them out with the Audio Cutter if they fall in pauses

How it works, in plain terms

The tool uses RNNoise, a small neural network trained to tell speech from noise, running as WebAssembly in your browser at 48 kHz. It looks at short slices of sound and decides how much of each is voice. Mains hum is removed separately with narrow notch filters that cut one precise frequency and its multiples. In Strong mode, steady hiss is taken out first with a spectral gate, and then the network cleans what is left. Everything happens on your device; the model is part of the page and is cached after the first visit.

Step by step

  1. Drop one or many files: MP3, WAV, M4A, MP4 or MOV. Videos up to 400 MB and audio up to 15 minutes per file are accepted.
  2. Start with Mode: Standard, Mains hum: Auto and Strength at 100%.
  3. Press play and switch between Original and Cleaned while the audio runs. Listen to the part with the most noise and a part with a quiet voice.
  4. If the voice sounds thin or watery, lower Strength in steps of 5 or 10. This brings back some of the natural room sound and often sounds better than a perfectly empty background.
  5. If a steady hiss remains, switch to Strong.
  6. Save as WAV or MP3 192k. For a video, the picture is copied unchanged and the cleaned sound is added back as AAC in an MP4; the first video save downloads the video tool once, about 30 MB.

Strength is a matter of taste

Full strength removes the most noise and also the most of what gives a voice its warmth: breath, room tone, the tail of each word. A completely silent background between words sounds unnatural to many listeners, because the noise seems to switch on and off. A good result usually is a strength where the noise is clearly lower but you can still hear that the speaker is in a room. Judge it on the speakers or headphones your audience will use, not only on studio monitors.

What it cannot fix

  • Other voices. The network is trained for speech, so it keeps speech. A second person talking behind the main speaker stays.
  • Music. It is made for voice, and will damage music rather than clean it.
  • Words that were lost. If the noise was louder than the voice, the words are not in the file to bring back.
  • Echo and reverb. A voice recorded in a tiled bathroom keeps its echo.
  • Clipping. Distorted loud peaks cannot be repaired.

When a take is damaged in these ways, re-recording closer to the microphone, in a softer room, with the fan off, beats any cleanup.

Where it fits in a workflow

  1. Cut the good take with the Audio Cutter.
  2. Remove noise here, one file at a time or several at once; several files download together as a ZIP.
  3. Level the result with Normalize Audio. Do this after the cleanup, because noise reduction lowers the level slightly and raising a noisy file raises its noise.
  4. Join the parts with the Audio Joiner if you have several.

Problems and fixes

  • The page says the file is too long. Files up to 15 minutes work; split a longer recording first.
  • The voice sounds "processed". Strong noise can leave artifacts. Lower the Strength, or use Standard instead of Strong.
  • The hum is still there. Set mains hum to 50 or 60 Hz manually, depending on where the recording was made.
  • It is slow. Processing runs on your device. A short recording usually finishes fast on a recent computer; phones and older computers take longer.

Recording tips that make cleanup easier

The best noise removal is less noise to begin with. Record in a small, soft room: a closet full of clothes beats a bare kitchen. Turn off fans, air conditioners and the refrigerator if you can. Keep the microphone close to your mouth, about a hand's width, so that the voice is far louder than the room. Record a few seconds of silence at the start; that clip tells you what kind of noise you have, and helps you judge the result. Keep phones and laptops away from the microphone cable to avoid buzz. If you must record outside, shield the microphone from wind: a gust is a sudden loud sound that no cleanup removes well.

Frequently asked questions

Is my recording uploaded?

No. Decoding, noise removal and saving happen on your device.

Does it work offline?

After the first visit the model is cached, so noise removal for audio can run without a connection. Saving a video needs the video tool, which downloads once.

Which output should I choose?

WAV for further editing; MP3 at 192 kbps for sharing.

Can I clean several files at once?

Yes. Add them all, check each one, and download them together as a ZIP.