You merged a report, a signed form and an appendix into one PDF, and now the page you want to cite is "somewhere around the middle". Or you have a thesis where the title page must stay clean and the introduction has to be page 1. Adding numbers sounds trivial, and it is, until the cover shows a "1", the appendix restarts at 1, or the number lands on top of your footer. This guide walks through the choices in the Add Page Numbers to PDF tool so the numbers come out right the first time.
What the tool does to your file
The numbers are drawn into the PDF in your browser. Your original file is not changed, nothing is uploaded and no watermark is added. The page previews show each number already in place before you save, so you can see a clash with existing footer text immediately instead of discovering it after printing.
The basic run, step by step
- Open the tool and drop your PDF. Every page appears as a preview with its number on it.
- Pick one of the six positions: top or bottom, each left, centre or right. Bottom centre is the usual choice for reports, bottom right for letters and manuals.
- Pick a format (1, Page 1, Page 1 of N, 1 / N, – 1 – or Custom text), or type your own. The placeholders
{n}and{total}stand for the current number and the last number, soReport – {n} / {total}works. - Check the previews and press Add page numbers. The numbered copy downloads straight away.
Which pages get a number
This is where most mistakes happen, so it deserves a decision before you touch anything else. The tool offers three ways to choose pages.
| You want | Choose | Why |
|---|---|---|
| Every page numbered, cover included | All pages | Simplest. Fine for contracts and scans where the cover is page 1 too. |
| Clean cover, numbering from the next page | Skip first | Page 1 stays empty. The second page gets the first number, which is 1 unless you change "Start at". |
| Numbers only in the body, for example pages 3-20 | Range | Front matter and appendices stay unnumbered. |
What "Start at" really means
Numbering always counts up from the first numbered page, and Start at is the number that page shows. With "Skip first" and the default Start at 1, the second page of the PDF reads 1, which is what you want when the introduction should be page 1. If you would rather have the number match the physical position, so page two reads 2, set Start at to 2. The same field is how you continue a document: if chapter one ends on page 48 in another PDF, enter 49 for the chapter that follows. The tool shows a hint under the field naming the first numbered page and the label it will carry, which is a quick way to confirm you got it right.
One detail matters for "Page 1 of N" and for {total}: the total is the last number in this run, not the page count of the file. Number 30 pages starting at 49 and the last page reads "Page 78 of 78", so a continued chapter stays self-consistent instead of contradicting itself. If you want the real total of a whole book, merge the files first with Merge PDF and number the combined file once.
Roman numerals for front matter
Books and long reports usually number the preface in i, ii, iii and the body in 1, 2, 3. The Numerals setting offers 1, 2, 3 or lowercase or capital Roman numerals, and a range lets you apply them to only some pages. The practical approach is to run it twice on the same file: first the front matter pages with Roman numerals, then the body range with ordinary numbers and Start at 1. Each run produces a new PDF, so use the output of the first run as the input of the second. Because the second run draws on top of the first, make sure the ranges do not overlap, or you will get two numbers on one page.
Double-sided printing: mirror for facing pages
When a PDF will be printed on both sides and bound, numbers look neater on the outer edge of every spread. Turn on Mirror for facing pages: pages with an even number get the number on the opposite side from odd ones. Choose a bottom-left or bottom-right position as your starting point and the tool alternates it for you. Mirroring follows the printed number, not the physical page, so check that your Start at matches how the booklet will be bound.
Font, size, colour and margin
The fonts are the standard PDF ones: Helvetica, Times and Courier, plain or bold. That is deliberate, because they display identically on every device and keep the file small. They cover Latin letters, digits and common symbols. If your custom text contains Cyrillic, Arabic or Chinese characters it cannot be drawn with these fonts, so keep the text to digits, Latin letters and symbols such as the dash or slash.
Size 9 to 11 pt suits most documents; larger numbers look like headings. Use the margin setting to move the number away from the page edge if your printer clips edges, and a darker grey instead of pure black if the number should be readable but quiet. Check the preview at the corners of a page that is rotated or has a different size: each page is numbered at the correct spot as you see it, whatever its size or rotation.
Common problems and fixes
- The number overlaps an existing footer. Change the position, for example from bottom centre to top right, or increase the margin so the number sits lower than the footer text.
- The number is hard to read on a dark scan. Pick white or a light colour for that document; the preview shows the result at once.
- Some pages in a mixed PDF look off. If the file mixes portrait and landscape pages, check a landscape preview. The tool places numbers by each page as displayed, but a page whose content is rotated by a scanner can still look unexpected. Fix orientation first with Rotate PDF, then number.
- The PDF will not open. A file that needs a password to open cannot be numbered. Remove the password with Unlock PDF if you have it, then try again.
- Numbers appear after you removed pages. Delete pages before numbering, not after. Numbers are drawn into each page, so removing a page later leaves a gap in the sequence.
The right order of operations
A reliable sequence for a multi-part document is: merge, delete unwanted pages, rotate crooked ones, reorder, and only then add numbers. Numbering is the last visible change because every earlier step would otherwise break the sequence. If you use Organize PDF to move pages around, do that before this tool too.
When this tool is the wrong choice
If you are writing the document yourself, put the numbers in the document editor or word processor instead: they update by themselves when you add a page. This tool stamps fixed numbers into a finished PDF, so it suits documents that are already final, such as merged scans, exported reports and combined attachments. It also cannot change numbering that already exists inside the pages; it only adds new numbers on top.
FAQ
Does my original file change?
No. You get a new numbered copy; the original stays as it was.
Can I skip the cover and also the last page?
Use Range, for example 2-19 in a 20-page file, and set Start at to the number you want on page 2.
Can I write "Page 3 of 12" with my own words?
Yes, with Custom text and the placeholders for the number and the total.
Is there a page limit or a watermark?
No watermark and no sign-up. Very large PDFs are limited only by your device memory.