You found a backing track, but it sits too high for your voice. Or you play a transposing instrument and the recording is in the wrong key. Changing the key means changing pitch without changing the tempo, and the first question is always the same: by how much? This guide shows how to count semitones and how to set the Pitch Changer so the result sounds as natural as possible.
Semitones in one minute
A semitone is the smallest step on a piano: from one key to the very next, black or white. Twelve semitones make an octave, and an octave doubles the frequency (or halves it, going down). The slider in the tool runs from −12 to +12, exactly one octave each way, and shows the shift as "+3 st" or "−2 st".
Counting how far to move
Name the key you have, the key you want, and count the steps between them on this circle of twelve notes: C, C♯, D, D♯, E, F, F♯, G, G♯, A, A♯, B, and back to C.
| From | To | Shift |
|---|---|---|
| C | D | +2 |
| C | G | +7, or −5 if you prefer to go down |
| E | C | −4 |
| A | F | −4 |
| G | B♭ | +3 |
Any shift can be written two ways, up or down, and the two differ by 12. For example, +7 and −5 land on the same note name an octave apart. Choose the one with the smaller number, because small shifts sound better (see below).
If you do not know the key
Singers can find the right shift by ear. Play the track, sing the highest and lowest notes you need to reach, and compare them with the highest and lowest notes in the song. If the top note is a tone and a half too high for you, you need about −3. A quick check with a tuner app on the phone, or a keyboard with the note names, makes this precise. Try the shift in the preview and sing along before you download.
Step by step in the tool
- Drop an MP3, WAV, M4A or OGG file, or paste it with Ctrl+V.
- Move the Pitch slider to your shift, or use a preset: −1 octave, −5, −1, Original, +1, +5, +1 octave. The hint under the slider shows the note change.
- Press play and switch between Original and the shifted version to compare. The length stays the same; only the pitch moves.
- Choose the Quality. Fast is quick and good for finding the right amount; Better quality searches more carefully and sounds cleaner.
- Pick MP3 · 192 kbps or WAV · lossless and download. The file name records the shift, for example pitched_-3st_name.mp3, so you can keep several keys apart.
Why smaller shifts sound better
Pitch shifting reshapes the sound, and the more it has to move, the more it changes the character of what you hear. Voices are the most sensitive. Shifting a singer by one or two semitones is usually not noticeable, while a shift of a fifth or more can sound like a different, slightly artificial person, because the natural resonances of the voice move with the pitch. Instruments with steady tones, such as a piano or a synth pad, tolerate bigger shifts. Drums are fine in most cases because they have little pitch to begin with, but a big shift can make cymbals sound odd.
Use the Fast mode while you search for the amount, then switch to Better quality for the file you keep. Compare both on a passage with a sustained note, because that is where differences show.
Combining with speed
This tool never changes the length. If you also need the song slower for practice, use the Audio Speed Changer with Keep the pitch switched on, and shift the pitch in a second step. Save the first result as WAV to avoid compressing it twice.
Problems and fixes
- The result sounds warbly or has an echo. Switch to Better quality, or use a smaller shift.
- The voice sounds unnatural. Large shifts alter the character of a voice. Try a smaller step, or transpose the performance instead of the recording.
- No download is offered. The slider is at 0. Move it first.
- The file will not open. Convert it to MP3 or WAV first.
What this tool cannot do
It shifts the whole file together. It cannot correct a single sour note, shift only the vocals of a finished mix, or detect the key for you. For a full song with vocals and instruments mixed, large shifts will change them all, and the mix will sound different. If you have the separate parts of a recording, shift only the part that needs it.
A practical example
Suppose a backing track is in the key of E and your voice is comfortable in C. Count down from E to C: E to D♯ is one step, D is two, C♯ is three, C is four. You need −4. Set the slider to −4 and listen to the shifted version while you sing. If the low notes of the song are now too low for you, try −3 instead, and compare. Often the best answer is between two numbers, and the only way to know is to sing along. Write the shift in the file name or in your notes, so that you can come back to the same key later. If you rehearse with a band, tell them the new key by name, not by the number of semitones.
For a capo on a guitar, remember that the tool changes the recording, not your instrument: moving the recording up two semitones lets you keep your fingering and place the capo on the second fret, or the reverse. Check by playing along before you commit to an export.
Frequently asked questions
Does changing the key change the song length?
No. The file keeps its length.
Is a semitone the same as a half step?
Yes, two names for the same interval.
Can I use it on a video's sound?
Extract the audio first with Video to Audio, shift it here, and put it back in your editor.
Are my files uploaded?
No. The audio is processed in your browser.