Skip to content
TabShedKitsMy desk

How to Watermark Photos Without Ruining Them

Updated 5 min readBy

Choose between a text and a logo watermark, size, position, opacity and rotation so your photo is marked but still pleasant to look at.

Image WatermarkAdd a text or logo watermark
Open Image Watermark
On this page
  1. Be realistic about what a watermark does
  2. Step by step
  3. Text or logo?
  4. Settings that look professional
  5. Keep the originals
  6. Common problems
  7. When not to use a watermark
  8. A worked example: portfolio samples for a client
  9. FAQ

You want to publish your photos but not give them away. A watermark is the usual answer, and it is also the usual way to spoil a good picture: too big, too bold, or in a corner that is easily cropped off. The Image Watermark tool stamps text or a logo on an image, and this guide explains how to set it so it deters casual copying without wrecking the photo.

Be realistic about what a watermark does

A watermark discourages casual reuse and makes the source obvious when a picture is shared. It does not prevent a determined person from cropping or editing it out, particularly one in a corner. The more of the picture it overlaps, the harder it is to remove, but also the more it harms the image. Pick the trade-off that fits: a photographer sharing portfolio samples may accept a visible mark across the picture; a shop showing product photos might prefer a small corner logo.

Step by step

  1. Drop the photo (JPG, PNG, WebP, GIF or BMP, up to 25 MB).
  2. Choose the Watermark type: Text or Image.
  3. For text, type the words, choose the Font (Arial, Georgia, Times New Roman, Helvetica or Impact), set a Font size and a color. For an image, choose a logo file and set its Size.
  4. Choose a Position: top left, top right, center, bottom left or bottom right.
  5. Adjust Opacity (10% to 100%) and Rotation (-45 to +45 degrees). The preview updates live, and you can zoom in.
  6. Download the result.
Text watermarkImage watermark
SetupType your name or siteUpload your logo
ControlFont, size (as a percent of the image width, 1% to 20%), colorSize from 10% to 200% of its normal scale
LooksPlain, quick, readableBranded, but needs a good logo file
Watch forLow contrast on busy areasA logo with a white box around it looks like a sticker

For a logo, use a PNG with a transparent background so only the mark appears. If your logo has a solid background, remove it first with the Background Remover.

Settings that look professional

  • Opacity: 30% to 60% is a good range. Too faint and it disappears on bright areas; too strong and it distracts. Check the preview on both a light and a dark part of the photo.
  • Size: text at a few percent of the image width is enough for a corner mark. Larger, centered, rotated text acts as a deterrent but takes over the picture.
  • Position: a corner is clean but easily cropped. Center is hard to remove but intrusive. A compromise is a mid-sized mark on a part of the picture that is hard to crop, such as over the subject's lower area or a textured region.
  • Rotation: a slight diagonal (around 20 to 30 degrees) makes text harder to clone out and looks deliberate. Keep logos upright unless they are designed to be angled.
  • Color: white text with some transparency works on dark images; dark text on light ones. Test it with the Color Contrast Checker if legibility matters.

Keep the originals

The tool produces a new file; the original stays untouched. Keep your unmarked originals in a safe place, and share only the watermarked copies. Never overwrite the original, because you cannot remove the watermark from the new file.

Common problems

  • The watermark is too small or too large on different photos. Text size is relative to the image width, so it stays consistent across different resolutions. A logo's size, however, is relative to its own pixel size, so adjust it for each picture.
  • The logo looks blurry. The logo file is small and is being enlarged. Use a larger logo image.
  • The text is hard to read on a busy photo. Raise opacity, change color, or move to a calmer region. For heavy outlines and shadows on text, the Add Text to Image tool has more styling.
  • The file is too big for upload. Compress it afterwards with the Image Compressor.

When not to use a watermark

If the goal is to hide someone's face in a photo, use the Blur Faces tool. If you only want to add a caption, not a mark of ownership, use Add Text to Image. And if you need the image to be shared widely with credit, a small unobtrusive mark is usually enough.

A worked example: portfolio samples for a client

A photographer wants to send proof images to a client who has not paid yet. Choose Text, write the studio name with the year, pick Georgia for an elegant look and white as the color. Set the size to about eight percent of the image width, opacity to around 40 and rotation to roughly 30 degrees, and position it at the center. The mark runs across the middle of the photo, so it cannot be cropped away without destroying the subject, yet at that opacity the picture can still be judged. After payment, the client receives the original without a mark. For a public portfolio, you might instead choose a small mark in the bottom right corner at a lower opacity, since the images are only samples.

FAQ

Is my photo uploaded?

No. Everything runs in your browser.

Can I watermark many photos at once?

The tool works on one photo at a time.

What is the output quality?

The original dimensions are kept, and the result is saved at a high quality setting.

Can I tile the watermark across the whole photo?

No, the tool stamps one mark at one of five positions.