You scan a document and it comes out upside down. A phone photo opens sideways in one app and upright in another. A selfie has text that reads backwards. All of these are orientation problems, and they take seconds to fix in the Rotate and Flip Image tool, if you know which control does what. This guide explains each control and the less obvious bits, such as fine rotation and what happens to the corners.
Step by step
- Drop a JPG, PNG, WebP, GIF or BMP (up to 25 MB).
- Use Rotate and Flip and watch the preview.
- When the picture looks right, press Download. The button appears once you have made a change.
- Use Reset changes to undo everything, or Choose another image to load a different file.
Which control for which problem
| Problem | Control |
|---|---|
| Picture lies on its side, top is on the left | Rotate 90 degrees clockwise |
| Picture lies on its side, top is on the right | Rotate -90 degrees (counter-clockwise) |
| Upside down | Rotate 180 degrees |
| Text is backwards (a mirror effect) | Flip horizontal |
| Picture is turned head over heels but not rotated | Flip vertical |
| Horizon slightly tilted | Fine rotation: -15, -5, +5 or +15 degrees, repeated |
The tool shows the current total rotation under the buttons, so you always know where you are. Rotations add up: pressing 90 twice gives 180.
Rotate versus flip
Rotating turns the picture like a sheet of paper on a table. Flipping makes a mirror image, so that left and right (or top and bottom) trade places, and any text reverses. Turning a photo around by 180 degrees is not the same as flipping it. A common mistake is to flip when you meant to rotate, which leaves the writing in the picture mirrored. If text reads wrong after your change, you probably used the wrong one.
Straightening with fine rotation
The small buttons rotate by 5 or 15 degrees in either direction. Press them repeatedly to make an adjustment such as 10 degrees, and keep an eye on a line that should be level, such as a horizon, a shelf or the edge of a page. This is useful for scanned pages that went in slightly crooked.
The rotation is by multiples of these steps only; you cannot type an arbitrary angle such as 3.2 degrees.
Corners and background
When you rotate by an angle that is not a multiple of 90, the rotated picture no longer fits its rectangle, and empty triangles appear in the corners. The Background control decides what fills them: Transparent or Color (pick a color or one of the swatches). The note under it says the output format is the same as the original, except for angled rotations, which are saved as PNG when transparency is needed. Choose Color with white if you plan to print or use a JPG, because JPG cannot hold transparency.
After straightening, you can remove the empty corners by cropping inward with the Image Crop tool, or trim transparent margins with Trim Image.
Quality
Turning by exact multiples of 90 degrees or flipping only moves pixels, so nothing is lost in the picture itself. Angled rotation has to resample the pixels, which can soften the picture slightly; keep the original and use small angles only when needed. If the result is saved again as JPG, normal compression applies.
Common problems
- The photo looks right in my gallery but sideways here (or the other way round). Photos from phones can carry an orientation tag that some apps apply and others ignore. Judge by the preview in this tool, rotate until it looks right, and save the downloaded file.
- The download button is missing. It appears only after you change something.
- Corners are transparent but I need white. Set Background to Color and choose white.
- The file is too large. Files over 25 MB are rejected. Shrink the image first with the Image Compressor or resize it on your device.
When not to use this tool
If a PDF page is rotated, use the Rotate PDF tool instead of converting to an image. If you want to change the shape of the picture rather than its orientation, crop it. If the picture is only a little off and you are about to crop it anyway, rotate first, then crop, so you cut the empty corners away in the same step.
A worked example: a scanned page that is slightly crooked and upside down
You scan a page and it comes out upside down and tilted by a few degrees. Press the 180 degree button first to turn it the right way up. Then use the small steps: press +5 or -5 and look at the text lines against the edge of the preview. If the lines drop toward the right, rotate in the opposite direction in 5 degree steps, and use the 15 degree step only for a larger tilt. When the lines look level, choose a white background for the corners, because the page will be printed or converted, and download. If a narrow white wedge remains at the edges, crop it away with the Image Crop tool.
Working on a batch of scans
The tool processes one picture at a time, so for a stack of scans work out the rotation once and apply the same buttons to each. Sheets scanned in the same orientation usually need the same rotation, and it helps to scan all the pages the same way up from the start. Name the output files in page order as you download them, so that you can combine them later, for example into a document with the Image to PDF tool.
FAQ
Is the picture uploaded?
No. Everything runs in your browser.
Can I do several changes at once?
Yes. Rotation and flips combine, and the preview shows the final result before you download.
What happens to animated GIFs?
GIFs are processed as a still image.