Skip to content
TabShedKitsMy desk

Social Media Profile and Banner Sizes From One Logo

Updated 6 min readBy

Make profile photos, covers, a link image and favicons for six networks from a single logo, with safe zones, one ZIP and a list of sizes to double-check.

Social Media KitProfile photos, covers, link image and favicons from one logo
Open Social Media Kit
On this page
  1. What you get in the ZIP
  2. Before you start: prepare the logo file
  3. Step 1: choose the starting background
  4. Step 2: fix the background so the logo is visible
  5. Step 3: space around the logo and the trim switch
  6. Why the covers have safe zones
  7. Step 4: download and use the files
  8. Problems and fixes
  9. When not to use it
  10. FAQ

You are setting up a new business, and every network asks for a different picture. The profile photo must work as a circle, the banner is a long strip that crops differently on a phone, the link preview needs its own shape, and the website still needs a favicon. Redoing one logo for each of them is the kind of job that eats a morning. The Social Media Kit makes the whole set from a single logo file, in your browser, and gives you one ZIP. This guide walks through the choices that matter so the pictures come out right the first time.

What you get in the ZIP

The kit makes 16 pictures: six profile photos, four covers, one link image and five favicon files. In detail:

GroupPictureSize (px)
Profile photosInstagram320 × 320
Facebook180 × 180
LinkedIn, X400 × 400
YouTube channel icon800 × 800
TikTok200 × 200
CoversFacebook cover1640 × 624
YouTube banner2560 × 1440
LinkedIn banner1584 × 396
X header1500 × 500
Link previewOG image1200 × 630
Favicons16, 32, Apple touch 180, Android 192 and 512square

Besides the pictures, the ZIP holds favicon.ico (16, 32 and 48 px), a site.webmanifest, an HTML snippet and a README. These are the sizes commonly cited for each network. Networks change them, so check each platform's current rules before you upload.

Before you start: prepare the logo file

The best input is an SVG, or a PNG with a transparent background that is at least a few hundred pixels wide. JPG and WEBP also work. The limit is 30 MB on a desktop and 15 MB on a phone. A tiny logo cannot be stretched for the 2560 px YouTube banner without going soft, so if all you have is a 200 px file, ask your designer for the vector, or make the logo larger first with the Image Upscaler. No logo yet? Press Try a sample logo to see how the kit behaves.

Step 1: choose the starting background

On the drop screen, the Background chips are Logo background (the default), White and Black. With Logo background, the tool detects whether your file has a flat color behind the logo and uses it; if none is found it uses white. You can change the color later, so this is only the starting point.

Step 2: fix the background so the logo is visible

After the logo loads, use the Background swatches. They are built from the logo's own colors plus white and black, and you can add more by typing into Paste colors (HEX, rgb() or hsl(), separated by commas or spaces, such as #14305E, #F28C28). If part of your logo almost matches the background, a notice reads "Part of the logo is hard to see" and lists the colors at risk (the check flags a contrast below 1.5). Pick another swatch. A navy mark on a navy circle looks perfect in the editor and disappears at 40 px on a phone.

If the file has a flat background and you want the logo alone on another color, switch on Remove the flat background. If you are unsure which colors to trust, the palette extractor gives you the exact HEX codes.

Step 3: space around the logo and the trim switch

  1. Space around the logo goes from 0 to 40 % and starts at 14 %. It is measured inside the safe zone for covers and inside the circle for profile photos, so a higher number shrinks the logo inside the part that stays visible. Raise it when your logo is wide or has long text; lower it for a compact mark that should fill the circle.
  2. Trim the empty border is on by default. Many logo files carry a lot of empty margin, and the tool cuts it away so the logo can be centered and sized exactly. Turn it off only if the margin is part of the design.
  3. Show safe zones draws a dashed box over the covers. It marks the part that stays visible on most screens and is not part of the exported file.

Why the covers have safe zones

A banner is cropped differently on a phone, a laptop and a TV, and some networks cover part of it with the profile photo. The YouTube banner is 2560 × 1440, but the area that shows on every device is 1546 × 423, which is the one official figure in the kit. For the others (Facebook, LinkedIn, X and the link image) the safe zones are our own margins, set so the logo is not where an app crops or overlaps it. On LinkedIn and X the profile photo sits at the left or lower left, which is why the logo is kept toward the middle. Treat the dashed lines as a guide, and check the live profile after the first upload.

Step 4: download and use the files

Press Download ZIP. The ZIP is made a moment after your last change, so wait for the "ZIP ready" state if you adjust things quickly. On a phone, the share button can send it to another app. Inside you will find folders for avatars, covers, link and favicon. Upload each picture to the matching network. For the website, put the favicon files in the site root and paste the HTML snippet into the head of your page; this guide on favicon files and HTML tags explains where each file goes. Use the 1200 × 630 file as your og:image so links look good when shared.

Problems and fixes

  • "This file could not be read as a logo". Use SVG, PNG, JPG or WEBP. A PDF or AI file will not open here.
  • The logo is tiny inside the circle. Reduce Space around the logo, and keep Trim the empty border on.
  • A visible white box around the logo. Your JPG has a flat white background. Switch on Remove the flat background, or choose White as the background.
  • The text is cut at the edge of a banner. A wide wordmark does not suit a 1500 × 500 strip. Raise the space setting, or use only the symbol for narrow banners.
  • Blurry result. The source is too small. Use an SVG or a bigger PNG.
  • "The ZIP could not be made". Try a smaller logo file.

When not to use it

The kit puts your logo on a flat color. If you want a photo banner, a tagline, a gradient, or a different layout for each network, you need a design tool. For one-off sizes use Image Crop. This kit is best for a clean first set that is consistent across the networks.

FAQ

Is my logo uploaded?

No. All pictures are drawn and zipped on your device.

Do I need a transparent PNG?

It helps, but is not required. A flat-background logo works thanks to the Remove the flat background switch.

Are these sizes guaranteed?

No. They are commonly cited sizes. Check each platform's current rules before you upload.

Can I change the colors after the first preview?

Yes. Every change updates the previews and the ZIP.