Turning a photo into pixel blocks takes a second. Making the result look good takes a little more thought, because the blocks average the photo's colors and lose contrast on the way. A face can turn into a gray patch, and a sunset can turn into a brown one. The Pixel Art Maker has only four controls, which makes it easy to learn. This guide shows the order in which to use them.
What the tool gives you
After you drop in a JPG, PNG, WebP or GIF, the page shows the original and the pixel art side by side. The settings are:
- Pixel size, from 2 to 32. Bigger blocks give chunkier pixels.
- Brightness, from -100 to 100.
- Contrast, from -100 to 100.
- 8-bit color reduction, a switch that limits the palette for a retro look.
- Reset settings and Choose another photo buttons.
Press Download pixel art to save the result as a PNG called pixel-art.png.
Recommended order
- Set the pixel size first. It determines the whole character of the image. The tool works on a reduced copy of your photo, no larger than 400 by 300 pixels, and Pixel size is the block size on that copy. A size of 8 on a 400-pixel-wide copy gives about 50 blocks across, and a size of 4 gives about 100. Because the working copy is always about the same size, the setting behaves the same on small and large photos. Judge by the preview.
- Then adjust contrast. Averaging inside each block pulls everything toward the middle, so most photos look flat after pixelation. Raise contrast by a moderate amount until shapes separate again.
- Then brightness. Correct any darkening, especially for faces and shadows.
- Finally try the 8-bit switch. Compare with and without. Each color channel snaps to steps of 32, so the picture uses a limited palette. That adds a retro feel but can shift skin tones and skies.
How the choices look
| Goal | Pixel size | Other settings |
|---|---|---|
| Recognisable portrait or pet | Small blocks (the lowest that still looks pixelated) | Slight contrast boost; 8-bit off |
| Bold retro poster | Large blocks | Higher contrast; 8-bit on |
| Landscape or skyline | Small to medium | Brightness up a little; 8-bit on for a game feel |
| Anonymous or abstract version of a face | Large blocks | Contrast neutral |
These are starting points, not rules. Because the tool has so few sliders, it is quick to test three or four variants and keep the best.
Photos that convert well
- Strong silhouettes against a plain background. They stay readable even at huge block sizes.
- High contrast in the original. Low-contrast photos turn into mud. You can raise contrast before in an editor, or use the slider.
- Close-ups instead of wide scenes. With a wide scene, blocks swallow the details. Crop first with the Image Crop tool.
- Simple colors. A busy patterned shirt becomes noise.
Common problems
- The result is too blurry-looking. That means the blocks are small relative to the photo. Increase Pixel size.
- Everything is brown or gray. Raise contrast, and try switching 8-bit off.
- The output is smaller than I wanted. The export is built from whole-number multiples of the block grid, at roughly the resolution of your source photo. Start from a larger photo for a bigger file, and avoid smooth enlarging afterwards, which blurs the block edges.
- The background distracts. Remove it first with the Background Remover and convert the cut-out, or crop closer to the subject.
Which pixel tool to pick
This tool is the quick one: block size, brightness, contrast and an on/off palette. The Photo to Pixel Art tool offers a grid width, named retro palettes such as Game Boy and PICO-8, dithering and exact export sizes. Use that one when you want a specific console look or a precise sprite size; the guide choosing the grid size, palette and dithering goes through it. Neither tool is a drawing editor; they convert photos only.
A worked example: a pet portrait
Drop a portrait of a dog sitting against a plain wall. At the default settings the dog's face is a soft brown patch, because averaging inside each block has erased the contrast between the eyes, nose and fur. Reduce the block size until the eyes are separate dark squares. Raise Contrast so the eyes and nose stand out against the fur, then lift Brightness slightly because contrast pushed the face too dark. Now switch on 8-bit color reduction and compare. If the wall changes to bands of slightly different grays, that is the palette limit at work, and it can look charming or distracting, so judge it by eye and switch it off if it distracts from the face.
Why the preview is the real test
The same slider values give different results on different photos, since the effect depends on the photo's own contrast and tones. A bright beach photo may need less brightness and more contrast than a dim indoor shot. Treat each value as a position on a dial that you adjust while looking at the original next to the result, which the page shows for exactly that reason. Resetting the settings between photos stops one photo's tweaks from spoiling the next.
Small details that improve the result
Crop the photo so the subject fills most of the frame before you load it. A subject that occupies a small part of the picture gets only a few blocks, and those blocks decide whether it reads as a dog or as a smudge. Prefer photos shot in even light; harsh shadows turn into hard black blocks that confuse the shapes. And if you plan to use the art as an avatar, check it at the small display size on a phone before you commit to it, because pixel art that looks good large can lose its main shapes when it is shown tiny.
Mistakes to avoid
- Starting with the 8-bit switch on. It hides how much each other slider changes the picture, so you cannot judge the effect of the others.
- Using the largest blocks for a face. At large sizes, the face has only a handful of blocks and every expression is lost.
- Raising contrast to the maximum. It produces harsh blocks in black and white and destroys midtones, which is what gives pixel art its character.
FAQ
Is my photo uploaded?
No. The conversion happens in your browser and nothing leaves your device.
What format is the download?
A PNG file named pixel-art.png.
Can I use the pixel art in a game?
The output is an ordinary PNG, so yes technically. Check that you own the rights to the original photo.