Skip to content
TabShedKitsMy desk

Image Too Large to Upload? Shrink It to Fit the Limit

Updated 5 min readBy

A practical way to get a photo under an upload size limit: quality, maximum width and height, and WebP, using the TabShed Image Compressor.

Image CompressorMake image files smaller
Open Image Compressor
On this page
  1. Why photos are so big
  2. Step by step
  3. Which lever first?
  4. PNG, JPG and WebP
  5. "Already optimised"
  6. How much quality can you give up?
  7. Common problems
  8. When not to compress
  9. A worked example: a passport-style upload with a 2 MB limit
  10. FAQ

A form says "file too large" and gives you a limit such as 2 MB. Your photo from a phone is several times that. You can fix this in under a minute, but the order of the changes matters: if you only lower quality you may wreck the picture, and if you only shrink the dimensions you may not get under the limit. This guide shows the sequence that works, using the Image Compressor.

Why photos are so big

A modern phone photo is thousands of pixels wide, far more than any web page or form needs. File size is driven by two things: how many pixels there are and how finely each one is encoded. The compressor lets you change both. Reducing the pixel count is the biggest lever; reducing quality is the second, and it is gentler on the picture than it sounds up to a point.

Step by step

  1. Open the tool and drop a JPG, PNG or WebP image. The limit for this tool is 10 MB per file. A bigger file is refused with a message, so export a smaller copy from your phone or editor first.
  2. Set a maximum size. Max width and Max height have presets: No limit, 1080p (1920 x 1080), 720p (1280 x 720), 800x600 and 640x480. The picture is fitted inside those bounds, so its proportions are kept.
  3. Set Quality. It moves from 10% to 100% in steps of 10, with presets: 100% (Best), 80% (High), 60% (Medium) and 40% (Low). Start with 80%.
  4. Press Compress image. The result shows the original and the compressed picture side by side, with the new size and the percentage saved.
  5. If it is still over your limit, press Change settings, lower the maximum size first, then quality, and compress again.
  6. Download the file.

Which lever first?

SituationChange this firstReason
Photo straight from a phone or cameraMax width / heightIt has far more pixels than a screen shows
Already web-sized, still too heavyQuality down to 60-70%Size is now mostly about encoding
Screenshot or graphic with flat colors, saved as PNGSwitch on Save as WebPPNG is lossless, so quality does nothing for it
Photo, and the site accepts WebPSave as WebPThe same look in a smaller file in most cases

PNG, JPG and WebP

The compressor keeps the original format unless you ask otherwise. A JPG stays a JPG, a PNG stays a PNG. For PNG the quality slider has no effect, because PNG is lossless; the tool says so in a hint. To make a PNG smaller you can reduce its dimensions, or turn on Save as WebP, which writes a WebP file instead. Check that the place you are uploading to accepts WebP before you use it; some older forms and email systems only take JPG and PNG. If WebP is refused, shrink the pixel dimensions instead.

Transparency only survives in PNG and WebP. If the output is a JPG, any transparent area is filled with white.

"Already optimised"

Sometimes the tool tells you that compressing would make the file bigger, so it kept the original. This happens with files that are already tightly compressed, or small images where encoding overhead dominates. It is not an error. Use a smaller maximum size to force a real reduction, or accept the file as it is.

How much quality can you give up?

There is no universal number, because it depends on the picture. Photos with smooth areas such as sky or skin show blocky artifacts first. Pictures with lots of texture hide the loss. The practical method is to compare: the result area shows your original next to the compressed version, so look at a face or a sharp edge at full size. If you cannot see a difference at 80%, try 60%. When you can see it, step back up one notch.

Common problems

  • The file got bigger. See above; the original is kept in that case. If the result is bigger because you switched to PNG-only content, use WebP.
  • The picture looks soft. You may have set a maximum size smaller than the display size. Raise it or use No limit and rely on quality alone.
  • Still over the limit after 40%. Reduce dimensions more; at that quality, more compression looks poor.
  • Colors look different. Re-encoding can change how some color profiles are read. For critical color work keep the original.

When not to compress

If you need to print a photo, keep the original, since compressing and reducing dimensions remove detail that cannot be recovered. If you only need exact dimensions rather than a smaller file, use the Image Resizer or the Image Crop tool. For video files, use the Video Compressor instead.

A worked example: a passport-style upload with a 2 MB limit

A phone photo of a few megabytes needs to fit a form that accepts 2 MB. You choose the 1080p preset as the maximum size, keep the quality at 80% and compress. If the result is under the limit, you are done. If it is still above, change the maximum size to 720p before touching quality, because pixels cost more than quality does. Only when the size is near the limit and the picture still looks good would you drop to 60%. Compare the preview with the original on a face or on printed text, since these show damage first.

FAQ

Is the image uploaded to compress it?

No. The compression happens in your browser, so the file stays on your device.

Can I compress several images?

The tool works on one image at a time. Repeat for each file.

What quality do I start with?

80% is a sensible first try. Lower it only if the file is still too big.

Does it change the aspect ratio?

No. The picture is fitted inside the maximum width and height without stretching.